4. Main forming machine 1) Forming steps: 18 steps 2) Outer diameter: 70mm 3) Machine frame (type): memorial arch frame, Thickness of memorial arch frame: 30mm 4) Roller information: A. Raw material: GCr12MoV B. Quenched degree: 56-58°C 5) Shaft material: 45# steel with heat treat and hard chrome plated on the surface 6) Main motor power: 18.5kw, Reducer ratio: 1:14,Reducer Type: Hardened reducer 7) With cooling device and another set of forming rollers.
5. Siemens control system with English 1). PLC brand: Siemens 2). Transducer brand: Siemens 3). Automatic length and quantity measurement 4). Stop control switch, to ensure the safety of production 5). Control station: Used to control product length and quantity, automatically cutting to length and stop when required quantity is achieved. 6). Error for length needs to be easy to adjust.
6. Gearbox transmission: Gearbox transport A. Gear material: 42CrMo B. Processing technical: hardening gear grinding processing C. Gear lubrication system: automatic oil drip by computer control, oil drip time and amount can be controlled according the needs. D. Gear cooling system: Automatic cooling circulation tank, which can guarantee not to exceed the gear temperature limit.
7.Non-stop hydraulic cutting device
1). Servo motor power: 5.5kw 2). Oil pump station 1 set 3). Cutter material: Cr12 mold steel with quenched treatment 4). Hydraulic cutting after forming, no distorting or wasting. High level safety factor.
What our machine benefit you and unique design?
1.Water cooling down system. Each roller part, we install water pipe, it could be used to cool down machine to make the machine use longer time. Meanwhile, in the water, we will add anti-rust chemicals to protect the finished product go rusting. 2.Gearbox transmission. For one thing, it can make sure the machine working steady and smoothly. For another thing, it can make sure coil will not be scare or burr by rolling. 3.Hydraulic shearing system. Powerful and fast shearing can make sure no burr after cutting.